$16.50
In stock
The fuel supply line that goes from the fuel filter, to the injector pump, is a 3 piece design. It has two lines, and a brass connector to join the two.
This is that brass union. 1 needed per engine.
This is part number 4 in the diagram:
This is the banjo bolt seal that goes between the head and fuel line at the fuel filter; and also the seal that is on…
The 1st Gen trucks used a “jiggle pin” style thermostat. As our trucks age, these thermostats start to give up and the trucks start to…
If you are installing a HX35 onto your 1st Gen, it would be smart to replace the O ring in the compressor housing by the…