Please note this kit is for single rear wheel 350 trucks ONLY! Due to the variances in parts Chrysler used on 350 SRW trucks, and the amount of axles that have been changed over 30 years when an original is blown; it is highly recommended that you verify the hub bearings before ordering! If the inner and outer bearing is the same size/part number, use a 250 kit. If the inner and outer are different bearing sizes, then this is your kit!
This Mopar rebuild kit is the kit you need to redo the hub bearings on the rear Dana 70 of your 1989-1993 Cummins 1st gen.
This kit will rebuild one complete axle hub and includes:
#41 – Inner Bearing cup Mopar PN 927015
#40 – Inner bearing roller Mopar PN 927017
#42 – Outer bearing cup Mopar PN 2955374
#43- Outer bearing roller Mopar PN 2852729
#39 – Seal Mopar PN 3496557
This is a Mopar authentic Restoration part made by the original manufacturer.
Two kits needed per truck.
