Description
Due to the variances in parts Chrysler used on 250/350 SRW trucks, and the number of axles that have been changed over 30 years when an original is blown; it is highly recommended that you verify the hub bearings before ordering!
If the inner and outer are different bearing sizes, then use this 350 seal. If the inner and outer bearing is the same size/part number, use a 250 seal!
This is the inner hub seal for the rear axle of a Dana 70 axle. This gets pressed into the hub/drum assembly and should be changed every time your rear hub/drum assembly is removed. As these seals age, they are what cause the liquid to leak out of your rear axle and drip down into your drum brakes. These seals are often nicked when the drum/hub assembly is serviced.
Two needed per axle (1 per hub).
This will fit 2WD and 4WD Single Rear Wheel D350/W350 Trucks.
