$20.00
In stock
This is a pinion seal for the front pinion of a Dana 70 axle. This is an SKF seal which was the original brand that Spicer/Dana and Mopar used.
This is part 5 in the diagram.
One needed per Dana 70.
According to the factory service manual, the front hub bearings should be repacked every 6,000 miles/10,000 km. To repack the bearings, you just require grease…
The 1st Gen trucks used a “jiggle pin” style thermostat. As our trucks age, these thermostats start to give up and the trucks start to…
Prefer to run factory Mopar filters and parts on your truck? This is your filter! This filter will fit both intercooled and non intercooled 1st…