Description
Due to the variances in parts Chrysler used on 250/350 SRW trucks, and the amount of axles that have been changed over 30 years when an original is blown; it is highly recommended that you verify the hub bearings before ordering!
If the inner and outer bearing is the same size/part number, use this 250 kit. If the inner and outer are different bearing sizes, then use a 350 kit!
This Mopar rebuild kit is the kit you need to redo the hub bearings on the rear Dana 70 of your 1989-1993 Cummins 1st gen.
This kit will rebuild one complete axle hub and includes:
#41 – Inner Bearing cup Mopar PN 2955374
#40 – Inner bearing roller Mopar PN 2852729
#42 – Outer bearing cup Mopar PN 2955374
#43- Outer bearing roller Mopar PN 2852729
#39 – Seal Mopar PN 4032450
This is a Mopar authentic Restoration part made by the original manufacturer.
Two kits needed per truck.
